logo_e.eps
The M-UF2G is flash memory that uses a USB interface.
You can connect it to products that use of USB
memory, such as Roland products. Before use, be sure
USB FLASH MEMORY
About the Symbols
About WARNING and CAUTION Notices
Used for instructions intended to alert the user
to read the owner’s manual of your product as well.
M-UF2G
The symbol alerts the user to important instructions or warnings.
The specific meaning of the symbol is determined by the design
contained within the triangle. In the case of the symbol at left, it is used
for general cautions, warnings, or alerts to danger.
931kai
*
When connecting the product to another device, carefully in-
sert it all the way in until it is firmly in place, taking care that
it is oriented and inserted in the correct direction. Do not use
excessive force when inserting it.
201a
to the risk of death or severe injury should the
unit be used improperly.
Before using the product, carefully read the sections
entitled: “USING THE UNIT SAFELY” and “IMPORTANT
NOTES.” These sections provide important information
concerning the proper operation of the product.
Additionally, in order to feel assured that you have gained
a good grasp of every feature provided by your new
product, Owner’s Manual should be read in its entirety. The
manual should be saved and kept on hand as a convenient
reference.
The symbol alerts the user to items that must never be carried out
(are forbidden).The specific thing that must not be done is indicated by
the design contained within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
Used for instructions intended to alert the user
to the risk of injury or material damage should
the unit be used improperly.
The included tube is for preventing accidental loss of
the cap. Operation will not be affected if you remove
this tube.
* Material damage refers to damage or other
adverse effects caused with respect to the
home and all its furnishings, as well to
domestic animals or pets.
The symbol alerts the user to things that must be carried out.The
specific thing that must be done is indicated by the design contained
within the circle. In the case of the symbol at left, it means that the
power-cord plug must be unplugged from the outlet.
Cap
Main Specifications
ALWAYS OBSERVE THE FOLLOWING
Interface
Connector
Capacity
USB 2.0/1.1
USB series A
2 GB
Tube
002a
•
Do not open or perform any
internal modifications on the
product.
•
004 Never use or store the
product in places that are:
•
014 Protect the product from
strong impact.
Roland products that support USB memory/
(Do not drop it!)
•
Subject to temperature
extremes (e.g., direct
Compatible Computers that have a USB interface and are
Devices
................................................................................
running one of the following operating
systems
Windows XP, Windows Vista
Mac OS X V10.4.3 or later
011 Do not allow any objects (e.g.,
sunlight in an enclosed
vehicle, near a heating
duct, on top of heat-generating
equipment); or are
•
When files are being read from, or written to the
M-UF2G, the LED at the rear of the M-UF2G will blink.
When not using the M-UF2G, attach the cap to cover the con-
nector for safety.
flammable material, coins,
pins); or liquids of any kind
(water, soft drinks, etc.) to
penetrate the product.
Operating
System
•
106 Never step on, nor place
heavy objects on the product.
*
962a
•
Damp (e.g., baths, washrooms, on
wet floors); or are
*
In the interest of product improvement, the specifications
and/or appearance of this product are subject to change
without prior notice.
...............................................................................
118aKai
*
Before disconnecting the M-UF2G from your device, follow
the instructions in the owner’s manual of your device to en-
sure that the memory can be disconnected safely.
................................................................................
•
•
•
•
•
•
Exposed to steam or smoke; or are
Subject to salt exposure; or are
Humid; or are
Exposed to rain; or are
Dusty or sandy; or are
•
This product, the cap
013 In households with small
removed from it, and the tube
included to prevent loss of
the cap must be kept in a safe place
out of children’s reach, so that there is
no chance of them being swallowed
accidentally.
•
*
The ReadyBoost feature of Windows Vista is not supported.
children, an adult should
provide supervision until the
child is capable of following
all the rules essential for the
safe operation of the product.
................................................................................
For EU Countries
Subject to high levels of vibration
and shakiness.
...............................................................................
...............................................................................
•
•
To prevent damage to the cards
from static electricity, be sure to
discharge any static electricity from
your own body before handling the
cards.
Do not touch or allow metal to
come into contact with the contact
portion of the cards.
Do not bend, drop, or subject cards
to strong shock or vibration.
Do not keep cards in direct
sunlight, in closed vehicles, or
other such locations (storage
temperature: -40 to 85˚C).
Do not allow cards to become wet.
Do not disassemble or modify the
cards.
Additional Precautions
IMPORTANT NOTES
551Kai
•
Please be aware that the contents of
memory can be irretrievably lost as a
result of a malfunction, or the
Placement
354a
•
Do not expose the product to direct
sunlight, place it near devices that
radiate heat, leave it inside an
enclosed vehicle, or otherwise subject
it to temperature extremes. Excessive
heat can deform or discolor the
product.
improper operation of the product.
Unfortunately, it may be impossible
to restore the contents of data that
was stored in the product’s memory
once it has been lost. Roland
•
•
Corporation assumes no liability
concerning such loss of data.
355b
553Kai
•
When moved from one location to
•
Use a reasonable amount of care
another where the temperature and/
or humidity is very different, water
droplets (condensation) may form
inside the product. Damage or
when using the product’s connector
and cap. Rough handling can lead to
malfunctions.
•
•
malfunction may result if you attempt
to use the product in this condition.
Therefore, before using the product,
you must allow it to stand for several
hours, until the condensation has
completely evaporated.
Using This Product
705Kai
*
204 Microsoft and Windows are registered
•
Never touch the connector of this
product. Also, avoid getting the
terminals dirty.
trademarks of Microsoft Corporation.
708Kai
*
206jWindows® is known officially as:
“Microsoft® Windows® operating
•
This product is constructed using
precision components; handle the
cards carefully, paying particular note
to the following.
system.”
207+209
*
Mac OS, Apple and Macintosh are
registered trademarks of Apple Inc.
Copyright © 2009 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
|